Series 500 Metal Roof Mount System
Headache-Free Solutions for Standing Seam and Corrugated Metal Roof
SnapNrack's mounts for standing seam and corrugated metal roof installations are engineered for complete integration with their time-saving system. The result is a clean, hassle-free foundation that bolts on fast and protects the integrity of the roof.
The Metal Roof Seam Clamp and the Corrugated Roof Block allow attachment of the L-foot or PV module directly to most commercial-grade metal roofs without penetrating the metal on standing seam roofs, or collapsing, or crushing the ridge in corrugated metal applications. The end design is simple, low cost, and very effective.
Standing Seam Clamp
The SnapNrack Standing Seam Clamp is manufactured from high tensile strength aluminum and engineered to work with multiple standing seam metal roof designs, including the Butler MR-24.
The Standing Seam Clamp can be used to attach everything from PV modules to snow guards – anything you can put on a roof!
Corrugated Roof Block
The Corrugated Roof Block allows attachment of the L-foot directly to a structural member covered with a corrugated metal roof without collapsing or crushing the ridge in the metal roof material.
Metal Roof Base
The Metal Roof Base provides a robust self-sealing mounting base for common corrugated metal roof profiles. The base seals to the roof with an integral EPDM Rubber Washer and a sealing top cap. The completed assembly has a 5/16” stud compatible with existing SnapNrack components and has been tested to over 4,000lbs of uplift force! The MRB can’t be beat for ease of installation and reliability over the service life of the system. Learn more about the new Metal Roof Base by downloading the new spec sheet.
The SnapNrack Series 500
The SnapNrack Series 500 Metal Roof Seam Clamp is a cost-optimized PV Mounting System for both residential and commercial metal roof mount installations. The system was designed to allow the attachment of PV modules or PV mounting rails directly to a commercial grade standing seam metal roof without penetrating the metal or collapsing the ridge in the metal roof material. The design is simple and low cost, but very effective.
The clamp is made from high tensile strength aluminum and has two models that will work with multiple metal roof designs including single and double rolled seams or similar designs. This allows a completely engineered system that is simple, robust, and efficient with the lowest possible total installed cost.
At a Glance
- Cam design applies pressure evenly on seam
- Utilizes a single bolt to secure the clamp
- Made from 6005 extruded aluminum
- 10 Year Material and Workmanship Warranty
- Attaches to the roof seam without penetrations
- Adaptable for residential and commercial metal roof mount installations.
- Clamps use 5/16” -18 bolt for clamping and mounting
- Tested on numerous roofing materials